ProAc K1 STAND
Scrivi la tua recensione
ProAc K1 STAND
ART099320
Pagamento sicuro con Bonifico Bancario, Paypal e carte di credito o Rate Banca Sella
Richiedi la disponibilità del prodotto prima dell'acquisto
Consegna veloce in 24/48 ore, in base alle tempistiche di disponibilità del prodotto
Reso garantito entro 14 giorni per problematiche dell'articolo
The premium ProAc range the 'K series has now been in production for the last 12 years. The K3, K6 K8 and most recently the K6 Sig have proven to have been very popular choices for people looking for the ultimate in sound reproduction. With this success we have been asked for a stand mounted K series speaker which we have been developing.
The K1 is a special stand mounted version using the Kevlar cone as in the K range and the tweeter is also our proven ribbon unit. Certain modifications have been made to the Cabinet, bass driver and tweeter to make it adaptable for us to be able to develop this to be suitable for a stand mounted loudspeaker.
Although the K1 is a stand mounted loudspeaker is has a surprisingly extended and accurate bass response with the usual beautiful midrange from the K series bass driver used within the K series.
The unique K design which has been incorporated into the K1 sees a cabinet which is bottom ported and a specially designed dedicated stand to complement and bring out the best in the K1, the K1 stand will be available separately from the loudspeakers.
The K1 considering its size gives an impressive sound stage for a stand mounted loudspeaker with an almost electrostatic open midrange and very accurate bass.
We are sure that the K1 will not disappoint.
Specifications
Nominal Impedance
8 ohms
Recommended Amplifiers
10 to 150 watts
Frequency Response
28Hz-30kHz
Sensitivity
90 dB linear for 1 watt at 1 metre
Bass/Midrange
Bass and midrange frequencies are both covered by a single 6.5" (165mm) Kevlar coned unit, the Kevlar cone covers all frequencies up to 3Khz and slightly above.
Tweeter
The ProAc ribbon tweeter has a ribbon lighter than a human hair with rear chamber damping and alnico magnet.
Crossover
Finest components on dedicated dual layer circuit board. ProAc Multistrand oxygen free copper cable throughout. Split for optional Bi wiring or Bi amplification
Dimensions
Height: 22.4 inches Width: 10.4 inches Depth: 15.8 inches
Mode
Stand mounting (Dedicated K1 stand available separately)
Grille
Acoustically transparent crimplene
Finish
Standard Finishes:
Black Ash, Mahogany, Cherry, Natural Oak, Silk White and Walnut.
Premium Finishes:
Rosewood, Ebony NEW Tamo Ash, Dark Eucalyptus
(Part Number: )
The K1 is a special stand mounted version using the Kevlar cone as in the K range and the tweeter is also our proven ribbon unit. Certain modifications have been made to the Cabinet, bass driver and tweeter to make it adaptable for us to be able to develop this to be suitable for a stand mounted loudspeaker.
Although the K1 is a stand mounted loudspeaker is has a surprisingly extended and accurate bass response with the usual beautiful midrange from the K series bass driver used within the K series.
The unique K design which has been incorporated into the K1 sees a cabinet which is bottom ported and a specially designed dedicated stand to complement and bring out the best in the K1, the K1 stand will be available separately from the loudspeakers.
The K1 considering its size gives an impressive sound stage for a stand mounted loudspeaker with an almost electrostatic open midrange and very accurate bass.
We are sure that the K1 will not disappoint.
Specifications
Nominal Impedance
8 ohms
Recommended Amplifiers
10 to 150 watts
Frequency Response
28Hz-30kHz
Sensitivity
90 dB linear for 1 watt at 1 metre
Bass/Midrange
Bass and midrange frequencies are both covered by a single 6.5" (165mm) Kevlar coned unit, the Kevlar cone covers all frequencies up to 3Khz and slightly above.
Tweeter
The ProAc ribbon tweeter has a ribbon lighter than a human hair with rear chamber damping and alnico magnet.
Crossover
Finest components on dedicated dual layer circuit board. ProAc Multistrand oxygen free copper cable throughout. Split for optional Bi wiring or Bi amplification
Dimensions
Height: 22.4 inches Width: 10.4 inches Depth: 15.8 inches
Mode
Stand mounting (Dedicated K1 stand available separately)
Grille
Acoustically transparent crimplene
Finish
Standard Finishes:
Black Ash, Mahogany, Cherry, Natural Oak, Silk White and Walnut.
Premium Finishes:
Rosewood, Ebony NEW Tamo Ash, Dark Eucalyptus
(Part Number: )
ART099320
