BRYSTON BP-26 + PS3 BLACK
Scrivi la tua recensione
BRYSTON BP-26 + PS3 BLACK
ART095024
Pagamento sicuro con Bonifico Bancario, Paypal e carte di credito o Rate Banca Sella
Richiedi la disponibilità del prodotto prima dell'acquisto
Consegna veloce in 24/48 ore, in base alle tempistiche di disponibilità del prodotto
Reso garantito entro 14 giorni per problematiche dell'articolo
Preamplificatore di linea a due telai, 20hz - 20kHz @ +/- 0,05dB, 2 ingressi XLR + 5 ingressi RCA nel modello base, 4 RCA + 1 fono nel modello MM o MM/MC, 4 RCA + 2 SPDIF nel modello DA; due uscite RCA e 1 uscita XLR. Include alimentazione MPS-2, telecomando opzionale. Disponibile anche con frontale da 19" (482,6 mm) su richiesta.Dimensioni per telaio: (LxAxP): 431,8 x 57,2 x 280 mm. Peso 9 kg
Features:
Low noise floor
Steel cabinet shielding to reduce EMI
Gold plated switch, contacts, and connectors
Outboard MPS-2 power supply required (see Power Supply in Other Products)*
Options:
Available with silver or black faceplate
17” or 19” faceplate available (non-rack mountable)
Optional BR2 remote control (see Accessories in Other Products)
Optional internal DAC, MM phono, or MC phono (see Accessories in Other Products)
GENERAL SPECIFICATIONS:
Frequency Response:20Hz-20kHz +/- .05dB
Maximum Output:
15 volts unbalanced, 30 volts balanced
IMD/THD: <0.0015% at 3 volts out
Sensitivity:
Balanced inputs: 1.00 V
UnBalanced line level inputs: 500 mV
Rated Noise:-100dB (Ref. 500mV unbalanced input, 20-20kHz)-103dB (Ref. 1 volt balanced input 20-20kHz)
XLR Connector Pin out (Balanced I/O):Pin 1 ground, pin 2 positive, pin 3 negative
Features:
2 pair balanced female XLR inputs
1 pair balanced male XLR outputs
5 pair RCA inputs 4 pair RCA + 1 pair phono inputs (BP26P & BP26MC only)
4 pair RCA + 2 SPDIF digital inputs (BP26 DA only)
2 pair RCA outputs 1 tape loop
Options:
Silver faceplate & hand held remote (std. is black)
19” x 1.75” Rack mount faceplate (std. 17” long)
Moving magnet RIAA phono equalization module Moving coil & moving magnet RIAA phono EQ module
Digital audio input (SPDIF) module
Dimensions:Standard version: 17” (or 19”) x 2.25” x 11”43.18cm x 5.7cm x 28cmRack mount version: 19” x 1.75” x 11”48.26cm x 4.44cm x 28cm
Weight:actual: 12.4 lb. (5.62Kg)shipping: 16 lb. (7.25Kg)
ADDITIONAL SPECIFICATIONS FOR BP26DA: Input Sample Rate: 16kHz to 108kHz.Word Length: 16, 18, 20, 24 BitData format: SPDIF standardDistortion: <0.002%, 20Hz-20kHzSignal to Noise Ratio:> 100dBFrequency Response: 20Hz-20kHz +/- .1dB
ADDITIONAL SPECIFICATIONS FOR BP26P: Phono Inputs: Distortion: <0.005%, IM or THD, any frequency or combination of frequencies from 20-20kHz, at rated output or below.Rated Noise: Phono: -80dBA referred to an input of 5 millivolts RMS @ 1kHzRIAA Accuracy: Within less than +/- 0.05dB from 20-20kHz inclusiveInput sensitivity: 5mV ADDITIONAL SPECIFICATIONS FOR BP26MCPhono Inputs: Distortion: <0.005%, 20-20kHz, with preamplifier driven to full rated outputNoise: Equivalent to approximately 1000 ohm metal film register (Thermal noise greater than 85dB below 0.6mV input, unweighted) Gain: 16.5 or 22.5dB (internally reconfigurable) Frequency Response: Below 5Hz to above 30kHz, with-in less than +/- 0.5dBInput sensitivity: 350uV (0.35mV )
(Part Number: ART095024)
Features:
Low noise floor
Steel cabinet shielding to reduce EMI
Gold plated switch, contacts, and connectors
Outboard MPS-2 power supply required (see Power Supply in Other Products)*
Options:
Available with silver or black faceplate
17” or 19” faceplate available (non-rack mountable)
Optional BR2 remote control (see Accessories in Other Products)
Optional internal DAC, MM phono, or MC phono (see Accessories in Other Products)
GENERAL SPECIFICATIONS:
Frequency Response:20Hz-20kHz +/- .05dB
Maximum Output:
15 volts unbalanced, 30 volts balanced
IMD/THD: <0.0015% at 3 volts out
Sensitivity:
Balanced inputs: 1.00 V
UnBalanced line level inputs: 500 mV
Rated Noise:-100dB (Ref. 500mV unbalanced input, 20-20kHz)-103dB (Ref. 1 volt balanced input 20-20kHz)
XLR Connector Pin out (Balanced I/O):Pin 1 ground, pin 2 positive, pin 3 negative
Features:
2 pair balanced female XLR inputs
1 pair balanced male XLR outputs
5 pair RCA inputs 4 pair RCA + 1 pair phono inputs (BP26P & BP26MC only)
4 pair RCA + 2 SPDIF digital inputs (BP26 DA only)
2 pair RCA outputs 1 tape loop
Options:
Silver faceplate & hand held remote (std. is black)
19” x 1.75” Rack mount faceplate (std. 17” long)
Moving magnet RIAA phono equalization module Moving coil & moving magnet RIAA phono EQ module
Digital audio input (SPDIF) module
Dimensions:Standard version: 17” (or 19”) x 2.25” x 11”43.18cm x 5.7cm x 28cmRack mount version: 19” x 1.75” x 11”48.26cm x 4.44cm x 28cm
Weight:actual: 12.4 lb. (5.62Kg)shipping: 16 lb. (7.25Kg)
ADDITIONAL SPECIFICATIONS FOR BP26DA: Input Sample Rate: 16kHz to 108kHz.Word Length: 16, 18, 20, 24 BitData format: SPDIF standardDistortion: <0.002%, 20Hz-20kHzSignal to Noise Ratio:> 100dBFrequency Response: 20Hz-20kHz +/- .1dB
ADDITIONAL SPECIFICATIONS FOR BP26P: Phono Inputs: Distortion: <0.005%, IM or THD, any frequency or combination of frequencies from 20-20kHz, at rated output or below.Rated Noise: Phono: -80dBA referred to an input of 5 millivolts RMS @ 1kHzRIAA Accuracy: Within less than +/- 0.05dB from 20-20kHz inclusiveInput sensitivity: 5mV ADDITIONAL SPECIFICATIONS FOR BP26MCPhono Inputs: Distortion: <0.005%, 20-20kHz, with preamplifier driven to full rated outputNoise: Equivalent to approximately 1000 ohm metal film register (Thermal noise greater than 85dB below 0.6mV input, unweighted) Gain: 16.5 or 22.5dB (internally reconfigurable) Frequency Response: Below 5Hz to above 30kHz, with-in less than +/- 0.5dBInput sensitivity: 350uV (0.35mV )
(Part Number: ART095024)
ART095024
