Q ACOUSTICS CONCEPT 500 BLACK/ROSEWOOD
Scrivi la tua recensione
Q ACOUSTICS CONCEPT 500 BLACK/ROSEWOOD
ART072198
Pagamento sicuro con Bonifico Bancario, Paypal e carte di credito o Rate Banca Sella
Richiedi la disponibilità del prodotto prima dell'acquisto
Consegna veloce in 24/48 ore, in base alle tempistiche di disponibilità del prodotto
Reso garantito entro 14 giorni per problematiche dell'articolo
Crossover
Great care has been taken in both the design of
the crossover and the selection of high grade
components, to introduce virtually zero noise and
distortion. The 4th-order Linkwitz-Riley topology
which gives an excellent response both on and
off-axis.
Cabinet Bracing
A method, known as P2P™ (Point to Point)
bracing, supports the parts of the cabinet that
need to be stiffened to deal with low frequency
panel vibrations.
Cabinet Walls
Constructed in three separate layers and filled
under pressure with a non-setting gel, this damps
the cabinet walls and converts higher frequency
vibrations into heat.
High Frequency Driver
Mechanically decoupled mounting which effectively isolates
the HF driver and speaker cabinet from reciprocal vibrations
that would otherwise be transmitted between them.
Mid/Bass Drivers
The Mid/Bass voice coil has an uncommonly large
diameter of 35mm which allows increased ‘shove’ and
higher power handling - as well as reducing compression.
Pressure Equalisers
Tall loudspeakers tend to suffer from resonances
caused by unwanted pressure gradients. Specially
designed Helmholtz Pressure Equalisers (HPE™)
balance out these pressure irregularities.
Specification
Frequency Response
41 Hz - 30 kHz
Average Impedance
6 O
Minimum Impedance
3.7 O
Recommended Power
25 - 200 W
Distortion (120 Hz - 20 kHz)
0.2 %
Crossover Frequency
2.5 kHz
Mid Bass / Driver
2 x 165 mm
High Frequency Unit
28 mm
Size (W x H x D)
400 x 1150 x 350 mm
Weight
42 kg
Links are provided to
adjust the high frequency
+ or - 0.5 dB.
(Part Number: ART072198)
Great care has been taken in both the design of
the crossover and the selection of high grade
components, to introduce virtually zero noise and
distortion. The 4th-order Linkwitz-Riley topology
which gives an excellent response both on and
off-axis.
Cabinet Bracing
A method, known as P2P™ (Point to Point)
bracing, supports the parts of the cabinet that
need to be stiffened to deal with low frequency
panel vibrations.
Cabinet Walls
Constructed in three separate layers and filled
under pressure with a non-setting gel, this damps
the cabinet walls and converts higher frequency
vibrations into heat.
High Frequency Driver
Mechanically decoupled mounting which effectively isolates
the HF driver and speaker cabinet from reciprocal vibrations
that would otherwise be transmitted between them.
Mid/Bass Drivers
The Mid/Bass voice coil has an uncommonly large
diameter of 35mm which allows increased ‘shove’ and
higher power handling - as well as reducing compression.
Pressure Equalisers
Tall loudspeakers tend to suffer from resonances
caused by unwanted pressure gradients. Specially
designed Helmholtz Pressure Equalisers (HPE™)
balance out these pressure irregularities.
Specification
Frequency Response
41 Hz - 30 kHz
Average Impedance
6 O
Minimum Impedance
3.7 O
Recommended Power
25 - 200 W
Distortion (120 Hz - 20 kHz)
0.2 %
Crossover Frequency
2.5 kHz
Mid Bass / Driver
2 x 165 mm
High Frequency Unit
28 mm
Size (W x H x D)
400 x 1150 x 350 mm
Weight
42 kg
Links are provided to
adjust the high frequency
+ or - 0.5 dB.
(Part Number: ART072198)
ART072198
