ANTHEM STR POWER AMPLIFIER SILVER
Scrivi la tua recensione
ANTHEM STR POWER AMPLIFIER SILVER
ART094814
Pagamento sicuro con Bonifico Bancario, Paypal e carte di credito o Rate Banca Sella
Richiedi la disponibilità del prodotto prima dell'acquisto
Consegna veloce in 24/48 ore, in base alle tempistiche di disponibilità del prodotto
Reso garantito entro 14 giorni per problematiche dell'articolo
Finale di potenza a stato solido. Potenza 400W x 2 su 8ohm, 600W x 2 su 4ohm e 800W x 2 su 2 ohm. Ingressi RCA e XLR. Display grafico multifunzione frontale da 7". Costruzione dual-mono con doppi trasformatori toroidali.
POWER AMPLIFIER
Impedance 8O 4O 2O
Power Output (per channel)
(Continuous, 20 Hz - 20 kHz, <1% THD) 400 W 600 W 800 W *
* Maximum 3 seconds two to high current draw.
THD (400 W) 0.0007% (1 kHz), 0.004% (20 kHz)
IMD (300 W)
ITU-R (19 kHz + 20 kHz) 0.0006%
SMPTE (60 Hz + 7 kHz) 0.0016%
SNR (IEC-A, ref .: 400 W) 121 dB
Frequency Response (20 Hz - 20 kHz) ± 0.1 dB
Power Bandwidth (-3 dB at 400 W into 8 ohms) 91 kHz
Slew Rate 30 V / µs
Damping Factor (20 Hz - 1 kHz) 360
Channel Separation 101 dB (100 Hz), 98 dB (10 kHz)
Input Impedance 10kO (RCA), 15kO (XLR)
Input Sensitivity (for 400W into 8O) 2.1 Vrms
Voltage Gain 29 dB
POWER REQUIREMENT
120 V version: In countries where the voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz.
220-240 V version: In countries where the line voltage is 220, 230, or 240 V, this product operates from single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz.
POWER CONSUMPTION
Standby 310 mW
Idle 65 W
Typical Playback Levels 150 W - 300 W
High Playback Levels 600 W - 1100 W
DIMENSIONS
Height 6-3 / 4 "(17.2 cm)
Width 17 "(43.2 cm)
Depth (not including power cord) 18-1 / 2 "(47 cm)
Weight (unpacked) 60 lb (27.3 kg)
(Part Number: ART094814)
POWER AMPLIFIER
Impedance 8O 4O 2O
Power Output (per channel)
(Continuous, 20 Hz - 20 kHz, <1% THD) 400 W 600 W 800 W *
* Maximum 3 seconds two to high current draw.
THD (400 W) 0.0007% (1 kHz), 0.004% (20 kHz)
IMD (300 W)
ITU-R (19 kHz + 20 kHz) 0.0006%
SMPTE (60 Hz + 7 kHz) 0.0016%
SNR (IEC-A, ref .: 400 W) 121 dB
Frequency Response (20 Hz - 20 kHz) ± 0.1 dB
Power Bandwidth (-3 dB at 400 W into 8 ohms) 91 kHz
Slew Rate 30 V / µs
Damping Factor (20 Hz - 1 kHz) 360
Channel Separation 101 dB (100 Hz), 98 dB (10 kHz)
Input Impedance 10kO (RCA), 15kO (XLR)
Input Sensitivity (for 400W into 8O) 2.1 Vrms
Voltage Gain 29 dB
POWER REQUIREMENT
120 V version: In countries where the voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz.
220-240 V version: In countries where the line voltage is 220, 230, or 240 V, this product operates from single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz.
POWER CONSUMPTION
Standby 310 mW
Idle 65 W
Typical Playback Levels 150 W - 300 W
High Playback Levels 600 W - 1100 W
DIMENSIONS
Height 6-3 / 4 "(17.2 cm)
Width 17 "(43.2 cm)
Depth (not including power cord) 18-1 / 2 "(47 cm)
Weight (unpacked) 60 lb (27.3 kg)
(Part Number: ART094814)
ART094814
