Scrivi la tua recensione
ANTHEM P2
ART074442
Pagamento sicuro con Bonifico Bancario, Paypal e carte di credito o Rate Banca Sella
Richiedi la disponibilità del prodotto prima dell'acquisto
Consegna veloce in 24/48 ore, in base alle tempistiche di disponibilità del prodotto
Reso garantito entro 14 giorni per problematiche dell'articolo
Finale di potenza HiEnd a 2 canali a stato solido. Potenza 325W x 2 su 8ohm, 500W x 2 su 4ohm e 675W x 2 su 2 ohm. Ingressi RCA e XLR. Costruzione dual-mono con doppi trasformatori toroidali di alimentazione. Trigger 12V.
General
Inputs 2 Single-Ended, 2 Balanced, 1 Relay Trigger (3.5 mm Mono Jack)
Outputs 2 Pairs Speaker Binding Posts, 1 Relay Trigger (3.5mm Mono Jack)
THD + N (225 W into 8 O) 0.0007% at 1 kHz, 0.008% at 20 kHz
IMD 0.00019% (CCIF, 325 W into 8 O)
POWER BANDWIDTH 10 Hz to 150 kHz
(+0 -3 dB, 325 W into 8 O)
FREQUENCY RESPONSE 20 Hz to 20 kHz (+0 -0.15 dB),
5 Hz to 100 kHz (+0 -2 dB)
INPUT SENSITIVITY (RCA and XLR 0 dB inputs) 1 Vrms in for 28.3 Vrms out
(100 W into 8 O)
INPUT IMPEDANCE 18 kO (RCA), 22 kO (XLR)
DAMPING FACTOR> 600 at 20 Hz, 400 at 1 kHz (ref. 8 O)
S / N RATIO 125 dB, A-weighted (ref. 325 W)
CROSSTALK (between any two channels) -140 dB (20 Hz), -80 dB (20 kHz)
VOLTAGE GAIN 29 dB
SLEW RATE 40 V / µs
SWITCHES
Front Panel Power (On / Off)
Rear Panel On / Off Modes (Trigger, Manual, Auto), Inputs (RCA, XLR, XLR -6dB)
POWER OUTPUT
(For channel, continuous RMS, 20 Hz to 20 kHz, <0.1% THD, one or all channel driven.)
Impedance 8O 4O 2O
# of Channels Driven 1 All 1 All 1 All
325 W 325 W 500 W 500 W 675 W 675 W
Statement P2 and P5 amplifiers are stable into any impedance down to short circuit at full output.
POWER REQUIREMENTS
SUPPLY VOLTAGE 105 to 130 V, 60 Hz
POWER CONSUMPTION 1800 W
DIMENSIONS
Height 9-3 / 8 inches (23.8 cm) including feet
Width Faceplate 19-1 / 4 inches (49 cm)
Chassis 17-1 / 4 inches (43.8 cm)
Depth 22-1 / 2 inches (57.2 cm) including handles
Weight (unpacked) 75 lb (34 kg)
(Part Number: ART074442)
General
Inputs 2 Single-Ended, 2 Balanced, 1 Relay Trigger (3.5 mm Mono Jack)
Outputs 2 Pairs Speaker Binding Posts, 1 Relay Trigger (3.5mm Mono Jack)
THD + N (225 W into 8 O) 0.0007% at 1 kHz, 0.008% at 20 kHz
IMD 0.00019% (CCIF, 325 W into 8 O)
POWER BANDWIDTH 10 Hz to 150 kHz
(+0 -3 dB, 325 W into 8 O)
FREQUENCY RESPONSE 20 Hz to 20 kHz (+0 -0.15 dB),
5 Hz to 100 kHz (+0 -2 dB)
INPUT SENSITIVITY (RCA and XLR 0 dB inputs) 1 Vrms in for 28.3 Vrms out
(100 W into 8 O)
INPUT IMPEDANCE 18 kO (RCA), 22 kO (XLR)
DAMPING FACTOR> 600 at 20 Hz, 400 at 1 kHz (ref. 8 O)
S / N RATIO 125 dB, A-weighted (ref. 325 W)
CROSSTALK (between any two channels) -140 dB (20 Hz), -80 dB (20 kHz)
VOLTAGE GAIN 29 dB
SLEW RATE 40 V / µs
SWITCHES
Front Panel Power (On / Off)
Rear Panel On / Off Modes (Trigger, Manual, Auto), Inputs (RCA, XLR, XLR -6dB)
POWER OUTPUT
(For channel, continuous RMS, 20 Hz to 20 kHz, <0.1% THD, one or all channel driven.)
Impedance 8O 4O 2O
# of Channels Driven 1 All 1 All 1 All
325 W 325 W 500 W 500 W 675 W 675 W
Statement P2 and P5 amplifiers are stable into any impedance down to short circuit at full output.
POWER REQUIREMENTS
SUPPLY VOLTAGE 105 to 130 V, 60 Hz
POWER CONSUMPTION 1800 W
DIMENSIONS
Height 9-3 / 8 inches (23.8 cm) including feet
Width Faceplate 19-1 / 4 inches (49 cm)
Chassis 17-1 / 4 inches (43.8 cm)
Depth 22-1 / 2 inches (57.2 cm) including handles
Weight (unpacked) 75 lb (34 kg)
(Part Number: ART074442)
ART074442
