ELECTROCOMPANIET AW 250R
Scrivi la tua recensione
ELECTROCOMPANIET AW 250R
ART102140
Pagamento sicuro con Bonifico Bancario, Paypal e carte di credito o Rate Banca Sella
Richiedi la disponibilità del prodotto prima dell'acquisto
Consegna veloce in 24/48 ore, in base alle tempistiche di disponibilità del prodotto
Reso garantito entro 14 giorni per problematiche dell'articolo
Amplificatore finale di potenza High-End stereofonico - Costruzione a circuiti bilanciati - Potenza 250W x 2 su 8ohm / 440W x 2 su 4ohm / 625W x 2 su 2ohm - Fattore di smorzamento >1000 - Ingressi XLR o RCA (tramite adattatore opzionale) - Link per Bi-amping con secondo finale - Possibilità di utilizzo in mono a ponte - Dimensioni: L483 x A210 x P450mm - Peso: 39kg
The Electrocompaniet AW250R power amplifier is known for its uncoloured and excellent reproduction qualities. From the first note of any familiar recording, you will be captivated by the AW250R and by the musical enjoyment it will give you.
The AW250R incorporates such refined features as: FTT (Floating Transformer Technology) power supply, capable of delivering twice the current of conventional power supply designs, as well as first class overall circuit design and state-of-the-art components.
Compared to more expensive High-End power amplifiers with lesser performance, you will truly cherish the AW250R. The Electrocompaniet AW250R features a balanced link to additional amplifier(s) for bi-amping. It can thus easily be used in bridged mode, delivering up to four times the power.
Floating Transformer Technology
A first class overall circuit design and state-of-the-art components.
100% Made in Norway
Every system is produced in our cutting-edge facilities on the west coast of Norway. Unlike other manufacturers, it is not only the design and assembly but also the complete production of the parts and components that is performed here. Producing the entire system right here in Norway allows us to ensure the highest possible quality.
SPECIFICS
All measurements are made at 120V / 240V //50Hz / 60Hz
Amplifier section
Output Impedance (20Hz - 20kHz) < 0.008 ohms
XLR (balanced) input impedance 110 kohm
Input sensitivity for rated output 1V
Max. peak current > 100A
THD (measured at 1kHz
half power, 8 W) < 0.001 %
THD (measured at 1kHz
-1dB, 8W) < 0.001%
noise
(measured with both inputs shorted) 400 Hz - 30 kHz : 90 µV
10Hz - 30kHz : 100µV
Rated output power
8 ohms 2 x 250W
4 ohms 2 x 380W
2 ohms 2 x 625W
1 ohms 2 x 1100W
power consumption
(no load or signal)
230W
Dimensions
Width 483mm / 19inches
Depth 450mm / 17inches
Height 210mm / 8.2inches
Weight 39kg. / 85.8lbs.
(Part Number: )
The Electrocompaniet AW250R power amplifier is known for its uncoloured and excellent reproduction qualities. From the first note of any familiar recording, you will be captivated by the AW250R and by the musical enjoyment it will give you.
The AW250R incorporates such refined features as: FTT (Floating Transformer Technology) power supply, capable of delivering twice the current of conventional power supply designs, as well as first class overall circuit design and state-of-the-art components.
Compared to more expensive High-End power amplifiers with lesser performance, you will truly cherish the AW250R. The Electrocompaniet AW250R features a balanced link to additional amplifier(s) for bi-amping. It can thus easily be used in bridged mode, delivering up to four times the power.
Floating Transformer Technology
A first class overall circuit design and state-of-the-art components.
100% Made in Norway
Every system is produced in our cutting-edge facilities on the west coast of Norway. Unlike other manufacturers, it is not only the design and assembly but also the complete production of the parts and components that is performed here. Producing the entire system right here in Norway allows us to ensure the highest possible quality.
SPECIFICS
All measurements are made at 120V / 240V //50Hz / 60Hz
Amplifier section
Output Impedance (20Hz - 20kHz) < 0.008 ohms
XLR (balanced) input impedance 110 kohm
Input sensitivity for rated output 1V
Max. peak current > 100A
THD (measured at 1kHz
half power, 8 W) < 0.001 %
THD (measured at 1kHz
-1dB, 8W) < 0.001%
noise
(measured with both inputs shorted) 400 Hz - 30 kHz : 90 µV
10Hz - 30kHz : 100µV
Rated output power
8 ohms 2 x 250W
4 ohms 2 x 380W
2 ohms 2 x 625W
1 ohms 2 x 1100W
power consumption
(no load or signal)
230W
Dimensions
Width 483mm / 19inches
Depth 450mm / 17inches
Height 210mm / 8.2inches
Weight 39kg. / 85.8lbs.
(Part Number: )
ART102140
