ELECTROCOMPANIET AW800 M REFERENCE
Scrivi la tua recensione
ELECTROCOMPANIET AW800 M REFERENCE
ART102137
Pagamento sicuro con Bonifico Bancario, Paypal e carte di credito o Rate Banca Sella
Richiedi la disponibilità del prodotto prima dell'acquisto
Consegna veloce in 24/48 ore, in base alle tempistiche di disponibilità del prodotto
Reso garantito entro 14 giorni per problematiche dell'articolo
The AW 800 M is Electrocompaniet’s brand-new flagship power amplifier. It replaces the legendary AW 600 NEMO as our most powerful monoblock power amplifier. The amplifier showcases an updated, yet unmistakable and distinctive Electrocompaniet design that is a perfect match for all current and legacy Electrocompaniet products.
RE-DESIGNED
The AW 800 M encompasses the Electrocompaniet direct coupled high open loop bandwidth topology, further enhanced with high slew-rate and very high bandwidth amplifier stages. In addition, a brand-new output stage is designed that heavily shields the input and driver stages from the load and makes the output extremely stiff and unaffected by the connected load. This has the added benefit of significantly simplifying the
workload of the already gently working feedback system and thus provides
vanishingly low distortion figures.
power supply
heavily updated
To feed the output stage the power supply is heavily updated and now has a total of 210000 uF supply filtering.
Mains power input is DC and RF filtered. The twin toroidal, wire gauge upgraded transformers are magnetically and electrostatically shielded to keep any noise from intruding.
The internal ground reference has been vastly over dimensioned and kept fully free of rectifying and output currents. The result is a very clean, noise free output signal regardless of output power, providing a very stable sound stage with the blackest background possible at any sound level.
TECHNICAL SPECIFICATIONS
Input impedance: 330 kO
Frequency resp. (in. filter active):0.5 – 220 kHz
Frequency resp. (in. filter dis.): 0.5 – 1.1 MHz
Voltage gain (mono, bal. input): 35 dB (x56)
Voltage gain (stereo, bal. input): 29 dB (x28)
Input-referred noise (20-20kHz): < 2 µV
SNR (ref. 1W/8O load, 20-20 kHz): 95 dB
SNR (ref. full power out, 20-20 kHz): 122 dB
Slew-rate (input filter disabled): 270 V/µs
DC output voltage: < 5 mV
THD+N: 0.0006 %
IMD: 0.001 %
Damping factor (8O load): > 1000
Power consumption standby: < 0.5W
Protection: DC, overload, temperature
RATED OUTPUT POWER STEREO:
8O load: 2 x 300 W
4O load: 2 x 600 W
2O load: 2 x 1000 W
RATED OUTPUT POWER MONO:
8O load: 800 W
4O load: 1500 W
2O load: 2200 W
WEIGHT & DIMENSIONS:
Weight: 55 kg – 122 lbs
Width: 406 mm – 15.98 inches
Depth: 488 mm – 19.21 inches
Height: 292 mm – 11.49 inches
*Features and specifications are subject to change without further notice.
(Part Number: )
RE-DESIGNED
The AW 800 M encompasses the Electrocompaniet direct coupled high open loop bandwidth topology, further enhanced with high slew-rate and very high bandwidth amplifier stages. In addition, a brand-new output stage is designed that heavily shields the input and driver stages from the load and makes the output extremely stiff and unaffected by the connected load. This has the added benefit of significantly simplifying the
workload of the already gently working feedback system and thus provides
vanishingly low distortion figures.
power supply
heavily updated
To feed the output stage the power supply is heavily updated and now has a total of 210000 uF supply filtering.
Mains power input is DC and RF filtered. The twin toroidal, wire gauge upgraded transformers are magnetically and electrostatically shielded to keep any noise from intruding.
The internal ground reference has been vastly over dimensioned and kept fully free of rectifying and output currents. The result is a very clean, noise free output signal regardless of output power, providing a very stable sound stage with the blackest background possible at any sound level.
TECHNICAL SPECIFICATIONS
Input impedance: 330 kO
Frequency resp. (in. filter active):0.5 – 220 kHz
Frequency resp. (in. filter dis.): 0.5 – 1.1 MHz
Voltage gain (mono, bal. input): 35 dB (x56)
Voltage gain (stereo, bal. input): 29 dB (x28)
Input-referred noise (20-20kHz): < 2 µV
SNR (ref. 1W/8O load, 20-20 kHz): 95 dB
SNR (ref. full power out, 20-20 kHz): 122 dB
Slew-rate (input filter disabled): 270 V/µs
DC output voltage: < 5 mV
THD+N: 0.0006 %
IMD: 0.001 %
Damping factor (8O load): > 1000
Power consumption standby: < 0.5W
Protection: DC, overload, temperature
RATED OUTPUT POWER STEREO:
8O load: 2 x 300 W
4O load: 2 x 600 W
2O load: 2 x 1000 W
RATED OUTPUT POWER MONO:
8O load: 800 W
4O load: 1500 W
2O load: 2200 W
WEIGHT & DIMENSIONS:
Weight: 55 kg – 122 lbs
Width: 406 mm – 15.98 inches
Depth: 488 mm – 19.21 inches
Height: 292 mm – 11.49 inches
*Features and specifications are subject to change without further notice.
(Part Number: )
ART102137
